陈冠希实干阿娇图视频最新章节列表_陈冠希实干阿娇图视频 陈冠希实干阿娇图视频最新章节列表_陈冠希实干阿娇图视频 ,蓝天航空公司的空姐mp3无弹窗全文阅读_蓝天航空公司的空姐 蓝天航空公司的空姐mp3无弹窗全文阅读_蓝天航空公司的空姐

发布日期:2021年06月13日
Hand Lay Up / Laminating
Products that are specifically designed and formulated for Hand Lay Up and Laminating.

Items 1 to 10 of 21 total

per page

Page:
  1. 1
  2. 2
  3. 3
  • EP4093

    ALCHEMIX GELCOAT EP 4093 is a colourless, two component, brushable, room temperature curing surface coat. GELCOAT EP 4093 is designed for use in vacuum forming moulds, applications requiring high heat resistance and negatives where very fine surface finishes are required. Learn More
  • EP4352

    ALCHEMIX EP4352 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated.   After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds. Learn More
  • EP502

    ALCHEMIX EP 502 is a very low viscosity, laminating and casting resin, with a choice of hardeners. When used for laminating, the low viscosity of ALCHEMIX EP 502 allows excellent wetting of fibres and fillers. ALCHEMIX EP 502 is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. Learn More
  • EP504

    ALCHEMIX EP 504 is a very low viscosity, cold-curing, unfilled epoxy resin system. The low viscosity resin produces excellent wetting of fibres and fillers. The rapid demould time makes this product ideally suited for track side repairs. A choice of three different hardeners is available, allowing fast cure in a variety of conditions. Learn More
  • EP519

    ALCHEMIX EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc. Learn More
  • EP5300

    ALCHEMIX EP 5300 is an ambient temperature cure, flexible epoxy system, exhibiting outstanding mechanical properties. It cures to give a tough, flexible system, it can be used as a casting resin or as a coating system. Learn More
  • EP571 / H3 (Fast) / H8 (Slow)

    ALCHEMIX EP 571 is a high temperature laminating resin system. It has low viscosity, enabling good wetting of fibres and fillers. A superior modified resin system, possessing good heat distortion resistance, used with HARDENER H3 or H8 either singly or blended produces versatility in pot life and cure time. ALCHEMIX EP 571 is formulated for applications such as RIM tooling, marine, aerospace, vacuum forming tooling and other applications requiring high heat dimensional stability. Learn More
  • EP574

    ALCHEMIX EP 574 / H574 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding mechanical and thermal properties. This system has low mixed viscosity and when cured shows excellent high temperature and physical properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc. Learn More
  • EP575

    ALCHEMIX EP 575 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding chemical resistance and mechanical properties. This system has low mixed viscosity and when cured shows excellent high temperature and physical properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc. The system is suitable for a variety of applications including hand lay up and RTM and is ideally suited for the repair of motorcycle fuel tanks. 陈冠希实干阿娇图视频最新章节列表_陈冠希实干阿娇图视频 陈冠希实干阿娇图视频最新章节列表_陈冠希实干阿娇图视频 ,蓝天航空公司的空姐mp3无弹窗全文阅读_蓝天航空公司的空姐 蓝天航空公司的空姐mp3无弹窗全文阅读_蓝天航空公司的空姐 Learn More
  • EP5752

    ALCHEMIX EP 5752 is an ambient temperature cure epoxy system, exhibiting outstanding mechanical and thermal properties. The system is formulated to produce high performance composite parts using a wide variety of fibre systems, including carbon fibre, glass fibre and aramid fibre. The system has been formulated to ensure efficient wetting of fibres, eliminating air entrapment, dry spots and porosity in the composite part. Three hardeners are available, allowing the working time and cure speed to be adjusted. Alternative hardeners for specific applications are available. Learn More

Items 1 to 10 of 21 total

per page

Page:
  1. 1
  2. 2
  3. 3